Machinery List & Pictures
| Qty | Make | Type | Details | X | Y | Z |
| 1 | Maxiem | Water Jet 1530 | 5ft x 10ft Cutting Area | |||
| 1 | Okuma | Horizontal Maching Center | 27.5 | 35.5 | 30.5 | |
| 1 | Toyoda | CNC Boring Mill | 63 | 47 | 41 | |
| 1 | Jokobsen | Surface Grinder | 30.5 | 10.5 | ||
| 1 | Trinco | Sand Blasting Unit | ||||
| 1 | Hydraulic Press | |||||
| 1 | Okuma | Vertical CNC | Full machining 4th axis | 41.34 | 22 | 18 |
| 1 | Okuma | Vertical CNC | With pallet | 30 | 18 | 18 |
| 1 | G&L | Vertical CNC | 29.5 | 17.7 | 17.7 | |
| 1 | Mitsubishi | Vertical CNC | 49 | 29.5 | 24 | |
| 3 | Trak | CNC Mill | 36 | 16 | 21.65 | |
| 1 | Yang | CNC Lathe | 10”S, 16”BC | |||
| 2 | Trak | CNC Lathe | 10”S, 36”BC | |||
| 1 | TOS | Boring Mill | 62 | 47 | 47 | |
| 2 | First | Vertical Mill | 36 | 12 | ||
| 1 | Chien Yeh | Lathe | 20”S, 40”BC | |||
| 1 | TOS | O.D. Grinder | 10’S, 20”BC | |||
| 1 | Stanko | SurfaceGrinder | 9 | 18 | ||
| 1 | Hyd. Mech | Cut Off Saw | Fully Automatic |
- 1 – Maxiem Water Jet 1530: 5ft x 10ft Cutting Area
- 1- Okuma Horizontal Maching Center: 27.5X, 35.5Y, 30.5Z
- 1- Toyoda CNC Boring Mill: 63X, 47Y, 41Z
- 1- Jokobsen Surface Grinder: 30.5X, 10.5Y
- 1- Trinco Sand Blasting Unit
- 1- Hydraulic Press
- 1- Okuma Vertical CNC: Full machining 4th axis, 41.34X, 22Y, 18Z
- 1- Okuma Vertical CNC: With pallet, 30X, 18Y, 18Z
- 1- G&L Vertical CNC: 29.5X, 17.7Y, 17.7Z
- 1- Mitsubishi Vertical CNC: 49X, 29.5Y, 24Z
- 3- Trak CNC Mill: 36X, 16Y, 21.65Z
- 1- Yang CNC Lathe:10”S, 16”BC
- 2- Trak CNC Lathe:10”S, 36”BC
- 1- TOS Boring Mill:62X, 47Y, 47Z
- 2- First Vertical Mill:36X, 12Y
- 1- Chien Yeh Lathe:20”S, 40”BC
- 1- TOS O.D. Grinder:10’S, 20”BC
- 1- Stanko Surface Grinder: 9X, 18Y
- 1- Hyd. Mech Cut Off Saw: Fully Automatic
